THE EFFECT OF COATING TEMPERATURE AND PARTICLE SIZE ON THE BURNING TIME OF KEMPI SHELL BRIQUETTES

Narsisius Vianus Ndopo Role; Danang Murdiyanto; Bernardus Crisanto Putra Mbulu

Authors

Narsisius Vianus Ndopo Role Universitas Katolik Widya Karya Malang
Danang Murdiyanto Universitas Katolik Widya Karya Malang
Bernardus Crisanto Putra Mbulu Universitas Katolik Widya Karya Malang

Keywords:

Biomass, Briquettes, Candlenut Shells, Burning Temperature, Burning Time.

Abstract

The current fuel is still sourced from fossil fuels, namely oil, coal and The current fuel is still sourced from fossil fuels, namely oil, coal and gas, which have many impacts on the environment. As an agricultural country located in the tropics, Indonesia is rich in biomass energy sources. In this research, the use of candlenut shells will be used or processed into alternative fuel, namely briquettes, with the aim of determining the value of combustion time and temperature produced through variations in composition and mesh size. The results of the research show that the effect of the burning temperature has an impact on the burning time of the briquettes and the resulting temperature, where the best burning time and temperature values of the briquettes are produced by a burning temperature of 400°C with a grain size of 100 mesh, namely 177 minutes with an average burning temperature briquettes 193.9°C.

References

Utomo Muhajir, “Dampak lingkungan pusat listrik tenaga fosil dan prospek pltn sebagai sumber energi listrik nasional .,” J. BATAN, no. 1, pp. 39–50, 2018.

Samsul Samrin, “Karakteristik Briket Arang Cangkang Kemiri (Aleurites Moluccana) Dengan Menggunakan Perekat Tapioka Dari Ekstraksi Ampas Ubi Kayu Dan Penambahan Getah Pinus,” Universitas Muhammadiyah Makasar, 2019.

Juliati, “Analisis Nilai Manfaat Ekonomi Tanaman Kemiri (Aleurites Moluccana) Di Desa Bungin Kecamatan Bungin Kabupaten Enrekang,” Universitas Muhhamadiyah Makassar, 2019.

B. Crisanto Putra, I. N. G. Wardana, and E. Siswanto, “Produksi Hidrogen dari Campuran Air dan Minyak Kelapa Murni (VCO) melalui Porous Media Tembaga menggunakan Prinsip Hydrogen Reformer,” J. Rekayasa Mesin, vol. 7, no. 2, pp. 87–93, 2016, doi: 10.21776/ub.jrm.2016.007.02.6.

Minarwati, “Pengaruh Konsentrasi Perekat Getah Pinus Terhadap Nilai Kalor Pembakaran Pada Biobriket Sekam Padi Dengan Tempurung Kelapa,” Universitas Islam Negeri Alauddin Makassar, 2012.

Muhammad Asrianto Tahir, Pengaruh Variasi Komposisi Dan Ukuran Partikel Terhadap Karakteristik Briket Kombinasi Arang Tempurung Kelapa Dengan Arang Bambu. 2019.

Petri Reni Sasmita, Suhu, Kalor, Dan Perpindahan Kalor. Padang, 2015. [Online]. Available: Http://Danaseknginden1.Blogspot.Com/

E. Elfiano, P. Subekti, and A. Sadil, “Analisa Proksimat dan Nilai Kalor pada Briket Bioarang Limbah Ampas Tebu dan Arang Kayu,” J. Aptek, vol. 6, no. 1, pp. 57–64, 2014.

Syam Widiyanto, “Analisa Nllai Kalor Pengujian Bahan Bakar Biomassa Terhadap Korelasi HHV (High Heating Value)”, 2017.