PROTOTYPE DESIGN OF PLATE ROLLER MACHINE
Keywords:
Machine Design, Prototypes, Machine Rolls, PlatesAbstract
Current development of manufacturing industry is expected to have a good and innovative system. Machine planning is a very important part in determining the manufacturing process. Machine prototypes are very important in model and product development, because they can help a designer to evaluate processes, machine performance, and product developments. In this study, a prototype design of a plate roll machine was made. One of the manufacturing processes that is widely used in companies and home industries is the rolling process. Plate roll machine prototype design to find suitable dimensions. The plate roll machine prototype will be made using a 3D printing machine with Polylatic Acid (PLA) material. The prototype plate rolling machine uses a synchronous electric motor type 60KTYZ which has a power of 14 watts and a rotation of 15 rpm. The prototype of this plate rolling machine was tested using aluminum plate as raw material with a length of 820 mm, a width of 10 mm and a thickness of 2 mm. The test results with a given compressive force of 75 N, namely a deflection of 9 mm with a rolling speed of 0.02 m/s. In the equilibrium test, it is produced by calculating structural statics that the action forces and reaction forces are proven to be balanced.
References
Danang Murdiyanto and T. Redationo, Ranjang Bangun Alat Roll Press untuk Mengolah Batang Tanaman Rumput Payung (Cyperus Alternifolius) Menjadi Serat Bahan Baku Komposit, JRM Vol. 7, No. 1, Tahun 2016, pp. 137–146, ISSN 0216-468X.
Danang Murdiyanto and Bernardus C.P.B., The Rolling Process of The Stem of Umbrella Grass to Produce Fiber Through the Reduction Method Using Gearbox, SJME KINEMATIKA Vol. 6 No. 2, 25 Desember 2021, pp 129-142, e-ISSN: 2655-903X.
Samhuddin, M. Hasbi, and Jamiluddin, “Perencanaan Sistem Transmisi Alat Peniris Pada Mesin Pengering Helm,” ENTHALPY-Jurnal Ilm. Mhs. Tek. Mesin Perenc., vol.
, no. 1, pp. 1–7, 2018.
Sularso and S. Kiyokatsu, Dasar Perencanaan dan Pemilihan Elemen Mesin, Jakarta:Pradya Paramita, 1994.
Sato, G. Takeshi, 2000. Menggambar
Mesin Menurut Standar ISO, Cetakan ke-9, PT. Pradya Paramita. Jakarta
P. I. Gultom and J. R. Heksa Galuh W., “Perancangan Mesin Rol Plat Dengan Metode, Cold Rolling Skala Home Industry,” Ind. Inov. J. Tek. Ind., vol. 9, no. 2, pp. 31–36, 2019.
M. N. A. Mukhtar, E. J. Pratama, and A. M. Hermawan, “Rancang bangun gearbox untuk turbin angin savonius vertikal (tasv) menggunakan metode fea 1),” Elem.Tek. Mesin, vol. 7, no. 2, pp. 128–137, 2020.
Deutschman, Aaron D., 1975, Machine
Design: Theory and Practice. New York: Macmillan Publishing Co, Inc.
Suci W.G. and Qalam, Rancang Bangun Mesin Pengeroll Sandal dengan Kapasitas 360 Buah/Jam, Teknik Mesin ITS, Surabaya, 2014.
Ir. Hery Sonawan, MT., Perancangan Elemen Mesin, alfabeta, Bandung, 2010.
Shygley, Joseph E, 1986. Perencanaan
Teknik Mesin jilid 1 & 2, Erlangga, Jakarta.
John Skelton, The Dynamic of a Roll Press Nip, University of Delaware, Newark, DE USA June 7-11.
Khurmi R.S. and Gupta, JK. A Text Book of Machine Design New Delhi Eurasia Publishing House (Put) Ltd. 1990.
Dieter, George E. Alih Sriati SDjaprie, Metallurgi Mekanik Jilid 1, PT. Erlangga Jakarta, 1996.
Reese, R. A., The Paper Machine Wet Press Manual (4th Edn,), TAPPI Press (Technical Association of the Pulp and Paper Industry).
Wibowo Y. Aprol, “Proses Pembuatan Rangka Pada Mesin Roll Pelat Penggerak Elektrik”, Proyek Akhir, Program Studi Teknik Mesin, Universitas Negeri Yogya. 2011.
Koten T.R.. & Fuji L., “ Pembuatan Alat mesin Pengerol Plat”, Tugas Akhir, Jurusan D-III Teknik Mesin, Universitas Halu Oleo, Kendari, 2015.
